> It must be able to tell values in "increments" of less then > 10 - otherwise I would never see 35 or 16 or 18 mils. I would > only see 30, 20 or 10 .... right? Isn't it just for processes > that tick below 10 mils (like a query that runs for 8 mils) > that it has a problem? I see variance in the numbers - just > nothing below 10. Your take?
What I've been told is simply that the accuracy of CF's timers is +/- 10 milliseconds, so anytime you see a value, such as 18 ms, it could be in actuality anywhere between 8 or 28 ms. This manifests itself in the display of either 0 or 10 ms for any values low enough, again according to what I've been told. Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ voice: (202) 797-5496 fax: (202) 797-5444 ______________________________________________________________________ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/[email protected]/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
