Error Diagnostic InformationODBC Error Code = S1000 (General error)
[MERANT][ODBC Oracle 8 driver][Oracle 8]ORA-01461: can bind a LONG value
only for insert into a LONG column
SQL = "Insert into Reports (RID, Job_Num, Job_Name, alias_name,
report_date, report_body, First_Name, Last_Name) Values (7575, 71016,
'GEN''L CAD', 'rayb', {ts '2002-05-31 00:00:00'}, 'DFTCAD Status (05/07/02)
Tapeout Support:
------------------------
1. Leo Rev2:
Atpg analysis on the final pass9 netlist is done. The coverage stands at
93.42% for 1500 vectors.
2. Cougar2:
Debugging the Jtag issues on the netlist. Was able to generate vectors.
Trying to compile the IKOS
simulation database.
3. Orion:
Atpg with the Rams bypassed is done. The coverage is at 91.85% for 1500
vectors. Vijay is looking
into the test point insertion to improve coverage.
Personal Status:
- Raghavan:
1. Worked on the shaheen iddq issue. Supporting the Jtag sims debug and the
ring oscillator vector generation
2. Working on the Cougar Atpg vector generation. Compiling the IKOS bin to
verify the vectors.
3. Wrapping up gathering the register list for the Qdsp4u2 Isds support.
4. Looking into the Sequential Atpg for orion.
- Vijay:
1. Performed Atpg vector generation and verification on the Leo Rev2 pass9
netlist
2. Working on the Orion Atpg vector generation and verification. Looking
into the Test point
insertion for Orion on the blocks with low coverage.
3. Wrapped up the Bsdl generation and verification scripts. Tried out the
scripts on Cheetah,
Qdsp4u2, Shaheen. Compiled a list of issues with inconsistency among the
files used for
generating the Bsdl files. Designers have to make this files consistent
among all the designs
4. Experiments with the Leo set/reset pins to improve the coverage. Initial
analysis showed that
by tieing the set/reset to shift_enable instead of the test_mode will
improve the coverage to 95.16.
The vectors generated have to be verified to make sure that they were
generated correctly by Tetramax
- Raghu:
1. Working on bringing up the flow for at-speed test and transition delay
test for orion for both the
functional and the testmode cases.
2. Helping the Shaheen team in debugging the issues with Iddq.
3. Working with the Synopsys AE in verifying the flow for At-speed test and
providing test cases
regarding the issue
Action Items:
-------------------
- Vijay:
Perform the Jtag sims on Orion.
Provide the Leo rev2 Atpg coverage break down to Inyup, so that Inyup can
pick the vectors for Functional
fault grading
- Raghavan
Perform the Jtag sims on the Cougar2
DFTCAD Status(05/15/02)
Tapeout Support:
------------------------
1. Cougar2
Atpg vectors with the Rams black boxed are Generated. Stil debugging the
Zero delay oscillation loop in Ikos simulation. Isolated the
problem to be in csc cells. Once the simulations are up, we have to
generate the atpg vectors with the rams bypassed and also perform
the test point insertion analysis for cougar2 to improve the test coverage.
2. Orion
All atpg vectors passed simulation. The coverage stand at 91.85 for 1500
vectors. Still doing experiments to insert the test points
to improve the coverage.
Personal Status:
------------------------
- Raghavan:
1. Worked on the Atpg support for cougar2. Trying to resolve the zero delay
oscillation loop. Tried out the different approaches
by emptying out the blocks that might cause the oscillation.
2. Debugging the Jtag sims failure on the bscan_ip and bscan_op test files.
3. Performing the remaining isds sims for qdsp4u3
- Vijay:
1. Few more action items to implement on the Bsdl generation.
a. Make a command for the compliance some what like this, compliance = pin,
value
b. Bsdl_Gen -help should show the config file.
2. Performed the Atpg vector generation and verification on Orion. Stil
looking into the coverage improvement
by doing test point insertion on orion.
3. Debugging the Orion Jtag sims failure issue
- Raghu
1. Worked with Raghavan on debugging the zero delay oscillation issue on
Cougar2.
2. Support the Shaheen Iddq debug issue.
3. Worked on the at speed test and functional mode vector generation
evaluation on Orion. Bringing up the
transition delay fault flow on Orion.', 'Ray', 'Bujarski')"
Data Source = "SSR"
The error occurred while processing an element with a general identifier of
(CFQUERY), occupying document position (56:2) to (56:53) in the template
file /prj/vlsi/web/Groups/RFAnalog/SSR/act_Report.cfm.
Ray Bujarski
858-845-7669
858-636-9900 pgr
[EMAIL PROTECTED]
______________________________________________________________________
Your ad could be here. Monies from ads go to support these lists and provide more
resources for the community. http://www.fusionauthority.com/ads.cfm
FAQ: http://www.thenetprofits.co.uk/coldfusion/faq
Archives: http://www.mail-archive.com/[email protected]/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
