Five did you ever get my email about Cyberlanding? -Ryan
On 10/26/07, 5A <[EMAIL PROTECTED]> wrote: > > > First off the access point needs to be running firmware with a linux > kernel. All the current nodes are running OpenWRT but DD-WRT should > work too. Second you will need to install wifi-dog ( > http://dev.wifidog.org/ > ) and make sure all the packages that wifi-dog needs are installed as > well. I can help you set things up. Only problem is my free time is > almost non-existent lately and rhino's is closed during the day when I > do have free time. > > Here is one thing work pointing out: > If the hardware has limited flash storage for firmware and requires > using a stripped down version of OpenWRT, DD-WRT or whatever firmware, > then it probably won't be able to run wifi-dog because of all the > package requirements. > > On Oct 26, 3:16 am, 0x0000 <[EMAIL PROTECTED]> wrote: > > I put a Linksys WRT54G in Rhino's Thursday night (2007/19/25). It's > > connected to the Knology cable modem that Rhino's has, and was > > providing "100%" signal strength in the back part of the club [the > > mezzanine]. Preliminary tests show 5Mb down/3Mb up. > > > > What do I need to do to tie this new hotspot in to the CFN mesh? > > > > 0x0000 > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "CHAOS706.ORG" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/chaos706?hl=en -~----------~----~----~----~------~----~------~--~---
