Hallo,

wir haben hier einen ceph-cluster mit 4 Nodes erstellt und möchten gerne die 
genutzten OSDs (SSDs) mit in den SMART Monitoring aufnehmen. Wenn ich smartctl 
direkt nutze, erhalte ich auch sofort Werte:

smartctl -A /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-116-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       
-       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       
-       810
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       
-       16
177 Wear_Leveling_Count     0x0013   100   099   005    Pre-fail  Always       
-       0
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       
-       0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0013   100   100   010    Pre-fail  Always       
-       10992
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       
-       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       
-       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       
-       0
184 End-to-End_Error        0x0033   100   100   097    Pre-fail  Always       
-       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       
-       0
190 Airflow_Temperature_Cel 0x0032   072   061   000    Old_age   Always       
-       28
194 Temperature_Celsius     0x0022   072   061   000    Old_age   Always       
-       28 (Min/Max 26/39)
195 Hardware_ECC_Recovered  0x001a   200   200   000    Old_age   Always       
-       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       
-       0
199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age   Always       
-       0
202 Unknown_SSD_Attribute   0x0033   100   100   010    Pre-fail  Always       
-       0
235 Unknown_Attribute       0x0012   099   099   000    Old_age   Always       
-       13
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       
-       2178046378
242 Total_LBAs_Read         0x0032   099   099   000    Old_age   Always       
-       1444497527
243 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       
-       0
244 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       
-       0
245 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       
-       65535
246 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       
-       65535
247 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       
-       65535
251 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       
-       2955429888


Das smartplugin bleibt leider leer:

/usr/lib/check_mk_agent/plugins/smart 
<<<smart>>>


Die Mountpoints sind wie folgt... z.B.:
/dev/sda1 on /var/lib/ceph/osd/ceph-12

Die Mountpoints werden auch von check_mk erkannt und zeigen die aktuelle 
Diskspaceusage an. 

Hat jemand das gleiche Problem für das smart-Monitoring?

Beste Grüße

Jan
_______________________________________________
checkmk-de mailing list
checkmk-de@lists.mathias-kettner.de
Verwaltung & Abmeldung unter
http://lists.mathias-kettner.de/mailman/listinfo/checkmk-de

Antwort per Email an