https://mathias-kettner.de/cms_wato_hosts.html#Basic%20Settings:%20Alias%20und%20IP-Adresse

Am 17.10.2016 um 11:33 schrieb Ringleb, Sarah:
> I don´t find this option in the host properties anymore. This is what im 
> missing. 
> 
> I just have followings options when I open the host properties (hosts -> Edit 
> properties of this host)  :
> 
> - hostname
> - permissions 
> - aliases
> - ipv4 address 
> - parents
> - Monitored on site
> - Ip address family
> 
> There is no option to change the agent type to snmp. Or am I at the wrong 
> place of the wato config?
> 
> 
> 
> 
> -----Ursprüngliche Nachricht-----
> Von: checkmk-en-boun...@lists.mathias-kettner.de 
> [mailto:checkmk-en-boun...@lists.mathias-kettner.de] Im Auftrag von Stefan 
> Heitmüller
> Gesendet: Montag, 17. Oktober 2016 11:27
> An: checkmk-en@lists.mathias-kettner.de
> Betreff: Re: [Check_mk (english)] SNMP checks
> 
> Hm, looks like the agent type is set to Check_MK instead of SNMP. Can you 
> double check this in the hosts properties?
> 
> Am 17.10.2016 um 11:23 schrieb Ringleb, Sarah:
>> I dont have this option. 
>> When I select "save and go to services" I get the message " Service 
>> discovery failed for this host: Cannot get data from TCP port 
>> 10.32.68.230:6556: [Errno 111] Connection refuse". 
>> There are no services shown.
>>
>>
>>
>> -----Ursprüngliche Nachricht-----
>> Von: checkmk-en-boun...@lists.mathias-kettner.de 
>> [mailto:checkmk-en-boun...@lists.mathias-kettner.de] Im Auftrag von 
>> Stefan Heitmüller
>> Gesendet: Montag, 17. Oktober 2016 11:16
>> An: checkmk-en@lists.mathias-kettner.de
>> Betreff: Re: [Check_mk (english)] SNMP checks
>>
>> Did you clicked "Save manual check configuration" after discovery of 
>> services?
>>
>> regards
>>
>> Stefan
>>
>> Am 17.10.2016 um 10:58 schrieb Ringleb, Sarah:
>>> Hello list,
>>>
>>>  
>>>
>>> i upgraded check_mk to version "raw 1.2.8p8" and I don´t get snmp 
>>> infos at the host overview anymore.
>>>
>>> When i´m at the host-config and select "save and test" everything is 
>>> fine. I get the info that snmp is available. But when I select the 
>>> added host I only get ping information.
>>>
>>> Is there  another way to configure the hosts to get snmp information 
>>> shown at the host overview (like printer toner status) and not only ping?
>>>
>>>  
>>>
>>> Best wishes,
>>>
>>>  
>>>
>>> Sarah
>>>
>>>  
>>>
>>> ------------------------------------------------------
>>>
>>> Sarah Ringleb
>>>
>>> Fachinformatikerin FR Systemintegration
>>>
>>>  
>>>
>>> Phone: +49 531 8852 1270         
>>>
>>> Fax: +49 531 8852 1570
>>>
>>> Mobil:  +49 174 288 1169
>>>
>>> mailto: sarah.ring...@lineas.de <mailto:sarah.ring...@lineas.de>
>>>
>>>    
>>>
>>> LINEAS Informationstechnik GmbH
>>>
>>> Theodor-Heuss-Straße 2                   
>>>
>>> 38122 Braunschweig, Germany
>>>
>>> Phone: +49 531 8852 0                   
>>>
>>> Fax: +49 531 8852 1500
>>>
>>> mailto: vertr...@lineas.de <mailto:mailto:%20vertr...@lineas.de>
>>>               
>>>
>>> http://www.lineas.de <http://www.lineas.de/>
>>>
>>>  
>>>
>>> Amtsgericht Braunschweig, HRB Nr. 204553
>>>
>>> Geschäftsführer: Frank Hildebrandt, Dr. Peter Mertinatsch, Dr. 
>>> Michael Goldapp
>>>
>>>  
>>>
>>>  
>>>
>>>
>>>
>>> _______________________________________________
>>> checkmk-en mailing list
>>> checkmk-en@lists.mathias-kettner.de
>>> http://lists.mathias-kettner.de/mailman/listinfo/checkmk-en
>>>
>> _______________________________________________
>> checkmk-en mailing list
>> checkmk-en@lists.mathias-kettner.de
>> http://lists.mathias-kettner.de/mailman/listinfo/checkmk-en
>>
> _______________________________________________
> checkmk-en mailing list
> checkmk-en@lists.mathias-kettner.de
> http://lists.mathias-kettner.de/mailman/listinfo/checkmk-en
> 
_______________________________________________
checkmk-en mailing list
checkmk-en@lists.mathias-kettner.de
http://lists.mathias-kettner.de/mailman/listinfo/checkmk-en

Reply via email to