I trying to monitor mikrotik(routerOS) queues Bytes-In and Bytes-Out, each 
queue have its own name

Listing all queues

root@nagios:~# snmpwalk -v2c -c snmpviewserver 192.168.251.2 
.1.3.6.1.4.1.14988.1.1.2.1.1.2
iso.3.6.1.4.1.14988.1.1.2.1.1.2.1 = STRING: "Teste"
iso.3.6.1.4.1.14988.1.1.2.1.1.2.2 = STRING: "3"
iso.3.6.1.4.1.14988.1.1.2.1.1.2.3 = STRING: "4"
....
iso.3.6.1.4.1.14988.1.1.2.1.1.2.251 = STRING: "252"
iso.3.6.1.4.1.14988.1.1.2.1.1.2.252 = STRING: "253"
iso.3.6.1.4.1.14988.1.1.2.1.1.2.253 = STRING: "254"


Queue

root@nagios:~# snmpwalk -v2c -c snmpviewserver 192.168.251.2 
.1.3.6.1.4.1.14988.1.1.2.1.1.2.1
iso.3.6.1.4.1.14988.1.1.2.1.1.2.1 = STRING: "Teste"

Queue BytesIN

root@nagios:~# snmpwalk -v2c -c snmpviewserver 192.168.251.2 
.1.3.6.1.4.1.14988.1.1.2.1.1.8.1
iso.3.6.1.4.1.14988.1.1.2.1.1.8.1 = Counter64: 727396

Queue Bytes-Out

root@nagios:~# snmpwalk -v2c -c snmpviewserver 192.168.251.2 
.1.3.6.1.4.1.14988.1.1.2.1.1.9.1
iso.3.6.1.4.1.14988.1.1.2.1.1.9.1 = Counter64: 0


I made few simple checks to monitor temps, signal strength, but this one is 
trickier since check_mk should create new service for each queue and monitor 
perf bytes-in/bytes-out, i tried to use if-64 as template but no luck.







_______________________________________________
checkmk-en mailing list
checkmk-en@lists.mathias-kettner.de
http://lists.mathias-kettner.de/mailman/listinfo/checkmk-en

Reply via email to