Replies to this message are sent to The Chevelle Mailing List
------------------------------------------------------------
On Sat, 30 Jun 2001 09:33:47 -0700 Dan Cobb <[EMAIL PROTECTED]>
writes:
>
> Replies to this message are sent to The Chevelle Mailing List
> ------------------------------------------------------------
>
> I need to realign the passenger door on my 66. It's about 1/8-1/4"
> too low
> over the entire length of the door and I can't get to the bolts that
> hold
> the hinges onto the body w/o first removing the fender, so....
> Are there any tricks or hidden bolts that connect the fender to the
> firewall, etc. that I should look out for? I should buy a Fisher
> Body
> Manual, but I never figured it would get very much use.
> If a basic procedure for this project is available, please let me
> know as it
> will be very appreciated.
> Thanks,
> Dan
> ++++
>
>
> -----------------------------------------------------
> To Unsubscribe please visit www.chevelles.net/list.html
> To start a new topic, send mail to: [EMAIL PROTECTED]
Should not be any hidden nuts bolts etc., if it is any thing like my
Impala fender it will be easy to remove the fender. Remove the inner
fender well along with the fender, i.e. do not remove fender from inner
fender well, it is a pain to realign them .There should be a top bolt by
front windshield and one at the base where the door and fender meet .Take
out the hood hinge and there should be some front bolts that are fun to
get at.Hope this helps.
Doug Fugere
69 SS 396 Elcamino
68 Impala 327
76 Burban 454
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
-----------------------------------------------------
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]
