Replies to this message are sent to The Chevelle Mailing List
------------------------------------------------------------
He's right that using a torch is the wrong way to do it. Using the torch
will mess the spring rate all up. You should do it with a chop saw, and DO
NOT quench the springs after they are cut. They will become very hard and
brittle.
Galen
----- Original Message -----
From: "Tiger Gutt" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 10, 2001 2:29 AM
Subject: Re: [Chevelle-List] Cutting Coils Again
>
> Replies to this message are sent to The Chevelle Mailing List
> ------------------------------------------------------------
>
> HI Everybody,
>
> DONT use a torch on the springs, sooner or later they
> will break !!!!
>
> Cut the coils with a grinder (I think its called that)
>
> the car will be on level as long as the springs have
> the same lenght.
>
>
>
> =====
> Andr�
>
> __________________________________________________
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail
> http://personal.mail.yahoo.com/
>
> -----------------------------------------------------
> To Unsubscribe please visit www.chevelles.net/list.html
> To start a new topic, send mail to: [EMAIL PROTECTED]
>
-----------------------------------------------------
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]
