Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
hey---- that string is sure tough it will hold a steering column 5 to 10 seconds before the plastic breaks thanks Bob K ----- Original Message ----- From: "Cliff Simpson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, December 12, 2001 12:02 PM Subject: Re: [Chevelle-List] gear selector problem > > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > > > >Has anyone had the string break off of gear selector in the dash part of > >the speedometer head? > > I pulled the entire dash a few years back and was able to work on the > selector then. I don't know if there is a way to get at it without pulling > everything. > > > If so how hard is it to retie it on or replace it. I had the speedometer > > head out but couldn't figure out how to get the gear selector indicator > > separated from the speedometer. > > I forget how I did it but it must have been simple since I figured it out > without the CSM. > > >Sweep type speedometer, may be I didn't look close enough when I had it > >out. I broke it when I was changing the steering column--forgot to unhook it > > Hmmm, I recently broke the indicator doing exactly the same thing so I > guess I need to fix mine too. :( > > Anyone got a CSM handy or know off-hand the easiest way to do this? > > -- > > Cliff "Waddya mean a plastic gear indicator won't hold up the steering > column?" Simpson > http://www.ucalgary.ca/~csimpson/TheOldsZone.html > > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] > ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
