Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
While you're at the gun shop, buy some cartridge case cleaner. It will remove any kind of residue from those copper connectors. -----Original Message----- > If you want to save the fuse holders go down to your > local gun shop and purchase a Stainless Steel bore > brush in 22 cal, these things are cheep so you can buy > several, taking the fuse block out should not be a > problem. > You can chuck one of these brushes up in a hand drill > and clean up the fuse holders like new, don't let a > little rust drive you crazy, this is a simple and easy > solution to make a fuse block with rusty clips a fully > functional piece of equipment again, or if you don't > want to take the fuse holder out, you can bend one of > these bushes in a 90 deg and do it by hand, a little > slower but with good results just the same. ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
