Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
Hello everybody, The good news ?? � have an aluminum gearbox from GM with a 7 bolt cover on the drivers side #952648 On the passengers side it's is stamped: US patent 3088336 and #3925660 The tailhousing reads #3857584GM It has got 10 spines on the input shaft and uses a TH-350 yoke (27 splines ???) The bad news: 1.One burned die grinder :( 2. The two upper mounting ears on the transmission are broken, I have the pieces. Do some of you have any experience with welded mounting ears ? Is it doable ? will it hold or should I start looking for a new gearbox ? Thanks ! Andr� -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Tigergutt Sent: 12. januar 2002 18:14 To: [EMAIL PROTECTED] Subject: RE: [Chevelle-List] Flowmaster exhaust Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------ _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
