Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
It's not really as simple as putting in a piece of band iron. The conversion kit pieces are stamped in a particular shape for the job, they are not just flat metal pieces. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of richard a schaefer Sent: Monday, January 14, 2002 8:01 AM To: [EMAIL PROTECTED] Subject: Re: [Chevelle-List] Conversion Kit Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------ No, but any welder should have some steel stock laying around. he could probably accomplish the same thing for a $20.00 bill. rick On Sun, 13 Jan 2002 22:10:13 EST [EMAIL PROTECTED] writes: > Hey Gang, Has anyone ever used this product before: 1964-72 Boxed > Lower Rear > Control Arm Conversion Kit,Pair of stamped steel inserts for boxing > lower > rear control arms,Welding required.This kit is fairly inexpensive > compared to > buying boxed control arms,I was just wandering if it was worth it or > should i > just buy the boxed control arms and forget about the kit.Thanks > > Doug, in PA > 72 SS/Malibu > Aces# 4897 ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
