Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
DON'T ! use a hammer on/in your rear end. Are you sure they are both 28 splines ? well I guess you have counted them more than once. Take the carrier out and try the axle in it, if it fits it is jus a matter of patience and it will enter. Kind Regards Andr� -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of [EMAIL PROTECTED] Sent: 5. februar 2002 05:40 To: [EMAIL PROTECTED] Subject: [Chevelle-List] HELP! rear axle question Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------ hello, I am in the middle of replacing a 10 bolt 8.2" open differential with a posi carrier. everything went really smoothley until it was time to slide in the axles. The axles won't slide into the splines of the posi. these are the original axles that were in the open differential. I counted the splines on the axles and the posi and they are both 28 spline. The only way to get these axles in is to hammer them in. Has anyboby had this problem? any help would be greatly appreciated Cory Thompson ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
