Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
craig Nuts that hold it in are on the engine side, then it pulls out thru interior. I'd run clean water from a hose thru it, to wash out all of the anti freeze. That way anything that spills inside will clean up a bit easier. If the motor is still installed, it may be a bear to get at the hold down nuts. rick On Fri, 8 Mar 2002 09:27:22 -0500 "Craig & Cerena Robertson" <[EMAIL PROTECTED]> writes: > I was able to degrease the engine compartment yesterday. Turned > out pretty good. Used Easy Off oven cleaner and Simple Green, along > with the old power washer. I would like to removed the heater core > and have it tested, along with putting new seals on the heater box > and windshield washer motor. Any suggestions. Can the Heat Core be > removed from the firewall or do I have to take it out through the > dash? Thanks. > > Craig > 69 SS ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
