Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
Everyone has a drill. I drilled numerous holes thru the rubber. When it was loose enuff, I pushed the center out. Then collapsed the outer shell with a sledgehammer and chisel. Nothing exotic. If you have a propane torch or welder, you can burn them out too. rick ---------- [EMAIL PROTECTED] writes: From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [Chevelle-List] rear control arm bushing questions Date: Thu, 14 Mar 2002 21:56:14 EST Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------ I m replacing my old bushingswith some polyurethane ones.Whats is the best way to get the old ones out? Do I need to take them somewhere to have the new ones pressed in? Any advice is greatly appreciated. Cory Thompson 68 Chevelle malibu ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] rick schaefer 72 El camino http://members.home.net/jimmy4/rick1972elky.html ACES #00140 Team Chevelle #00038 ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
