Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
I had pretty good luck with a stick glue gun try attaching the crome pieceon one of the old panels and see how strong it is when it cools off i would clean the area with laquer thinner to remove the outer finish on the vinyl you can mask off the rest of the area so you dont damage the outer areas Bob C Samantha Roberts wrote: > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > If you find a way let me know,, i also can't get my original chrome strips > to stay attached! the only thing i've tried was contact cement, but it wont > hold. > Samantha > [EMAIL PROTECTED] > > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, March 09, 2002 11:32 PM > Subject: [Chevelle-List] door panels 68 > > > > > Replies to this message are sent to The Chevelle Mailing List > > ------------------------------------------------------------ > > > > i bought a door panel kit for the 68 chevelle, it has a piece of chrome > that > > runs horizontally across the door about mid way (little more towards the > top) > > it seemed to be heat welded or something on the old panels, and when i > took > > it off, it took the vinyl with it, i peeled off the old vinyl, does any > one > > know how i reattach it to the new panels????? thanks > > > > ----------------------------------------------------- > > To Unsubscribe please visit www.chevelles.net/list.html > > To start a new topic, send mail to: [EMAIL PROTECTED] > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
