Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
Thanks that answered the question. I'll check it tonight. Lance -----Original Message----- From: Cliff Simpson [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 21, 2002 8:28 AM To: [EMAIL PROTECTED] Subject: Re: [Chevelle-List] 66 engine mounts (frame side) Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------ "Wurzbacher, Lance" wrote: > Anybody out there know of a good way for me to tell which frame motor mounts > I have? Someone is going to take pictures for the motor mount FAQ I was trying to build but he hasn't so I don't got no pictures at http://www.ucalgary.ca/~csimpson/Tech/Mounts.html. Sorry, my apologies. But it does say "Identifying Frame Pads - You can check by measuring from the center of the two top bolts that hold the mount to the frame to the center of the cross bolt that attaches the frame mount to the motor mount. The big block frame mounts will measure about 2 1/4", while small block mounts will measure about 1 1/2". Whichever ones you have (big or small block), get the motor mounts to match." HTH -- Cliff "Warning: below -10F this sig may be unreLiab!e." Simpson & Kermit http://www.ucalgary.ca/~csimpson/TheOldsZone.html ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
