|
oh kool! also, what is this "thing" about
angles? like i hear i set the valves (not sure if it the valves,
just...whatever it is) at 32 degrees...what is that, and what does it do?
thanks so much!
Chad
----- Original Message -----
Sent: Sunday, June 30, 2002 4:58 PM
Subject: Re: [Chevelle-List] LS - 6 or
Clone/compression ratio
Generally 10.0-10.5 compression will run on 92 no porblem. I ran 11.3 to 1
with iron heads and a zero deck and it loved 92, even on 95 degree days. CC
designs such as the vortecs allow about an extra .8 of a point of compression
on the same octane. A 38-45 quench will also help detination. Alum heads also
allow an extra point or so compression and different cam grinds will bleed of
compression at lower rpm's which basically means you only need to add a 92/
higher octane mix when you plan to race up in higher rpm
ranges.
|
