Mister questions, have you tried, http://www.chevelles.com/tools/ftl1.html Look, get off your lazy a... and use that computer. The Internet is full of information. You just want to sit there and ask questions because your too lazy. If your too lazy to looked up information, I doubt you will remember 1/4th of any information that has been given here from the list. 1) DO A SEARCH ON WELDERS. 2) GO TO WWW.CHEVELLES.COM 3) GET OFF THE COMPUTER AND GO PLAY WITH SOME FRIENDS, THAT IF YOU HAVE ANY. Keith Cooper
----- Original Message ----- From: "Chad Playso" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 23, 2002 9:44 PM Subject: Re: [Chevelle-List] Which is best kind of welding? > Well, is there a specific welder you should use when welding this (panel, > frame, etc...) for the strongest bond? > > ----- Original Message ----- > From: "aaw1255" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, July 23, 2002 12:13 PM > Subject: RE: [Chevelle-List] Which is best kind of welding? > > > > Your welding terminology is a bit off. A MIG(metal inert gas) welder is > an > > arc welder, as it uses an arc to weld. It is also known as a GMAW, gas > metal > > arc welder. I believe you are refering to the common "stick" > SMAW(shielded > > metal arc welding) welder. TIG(tungsten inert gas) welding, another > popular > > form of welding, is also an arc welding process, also known as GTAW, gas > > tungsten arc welding. Another common type is FCAW, flux cored arc > welding. > > Case in point, there are many types of arc welders and types of > welding,(arc, > > gas, electron beam, laser, resistance spot welding, projection, etc) I > just > > thought I should point out that the most common types that people use(not > > including oxygen/acetylene) are all arc welders as they use an arc to > weld. > > (Sorry, you said, "correct me if I am wrong" -- The whole arc welding > thing is > > one of my pet peeves) > > > > Aaron Weaver > > 67 SS 396 > > > > >===== Original Message From [EMAIL PROTECTED] ===== > > >I've been reading about different kinds of welders, and I was wondering, > > >which is the best kind to use? To me, it seems like MIG welders are the > > >best for body panels, and ARC welders are good for everything else. > Correct > > >me if I am wrong. Also, I cannot find the info to how THICK the metal is > > >for the panals as I've heard that when you weld, the metal you weld is > > >supposed to be as thick as the metal on the body. So how thick is > a...1970 > > >Body Panel? > > > > > > Bye > Bye, > > > > > >Chad > > > > > >----------------------------------------------------- > > >To Unsubscribe please visit www.chevelles.net/list.html > > >To start a new topic, send mail to: [EMAIL PROTECTED] > > > > > > > > ----------------------------------------------------- > > To Unsubscribe please visit www.chevelles.net/list.html > > To start a new topic, send mail to: [EMAIL PROTECTED] > > > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] > ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
