Hey guys, are you'll sure about your geometry? I've seen straight, 45 and 90 degree boots but never 135 or 180 degree ones. 180 degree would be so extreme that the boot would bend into a "U" shape.
MSD wires/boots are bend-to-fit any angle you need. Emil Dusek:71 SS-502 396guy wrote: > I've had the best luck with 135 degree boots with headers. Some 90's will > fit and some 180's will fit, but I haven't found 8 plugs yet that will work > with all 90's or all 180's. I have found that all 135 degree angles will > work. Personally, I like Taylor wires. They come in the 135 degree boot > and the plug boots are easy to grasp. > > Dale McIntosh > ACES #1709/TC #92 Gold > 67 SS/67 Elky > http://www.dalesplace.com > http://www.team67.com > http://www.midwestchevelles.com > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of Richard M. Pruett > > Sent: Tuesday, August 13, 2002 6:19 PM > > To: Chevelle-List > > Subject: [Chevelle-List] Headers and spark plug wires > > > > > > OK all, > > I have installed my headers and it's time to start looking > > for new spark > > plug wires. I'm working on a '69 Chevelle 396 SS 4-speed and installed > > Hooker comp headers part# 2455. I recall reading about 90 degree and 135 > > degree boots for the plugs and need some direction. Local auto parts store > > has a set of Accel 8.5 mm with straight and 90 degree boots for about $75. > > > > Has anyone on the list used these? Any suggestions from any 396 guys? > > > > > > ----------------------------------------------------- > > To Unsubscribe please visit www.chevelles.net/list.html > > To start a new topic, send mail to: [EMAIL PROTECTED] > > > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
