RE: [Chevelle-List] ignition and wiper switch tools

[Brenna Olwine]

Cool.  I don’t remember the specifics now but I know we got the bezels off and the ignition switch out without a special tool. Good luck! Brenna   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Brian Sent: Monday, September 02, 2002 6:16 PM To: [EMAIL PROTECTED] Subject: Re: [Chevelle-List] ignition and wiper switch tools   I think we are, at least pretty close. The paper clip is used to get the key cylinder out of the switch assembly. The bezel nut which has three groves around the outside, holds the switch to the dash. I would think since there are three groves that there might be a tool with the same grove pattern, but I haven't seen it (yet). The wiper switch on mine has two small holes, no screw driver slot. The nut on my headlight switch has a screw driver slot. I can "rig" tools that'll do the job almost all the way but I'd like to try to find the actual tools if I can. Brian www.66chevelless.com Maybe we are not talking about the same thing, but on my 67 we did not buy any special tools. We used a screw driver on the wiper switch(and of course the button on the bottom of the switch) and a paper clip on the ignition bezel. Brenna