Donnie, on my 1968 i put on parts from a 79 Malibu, pitman arm was different so on advise from the list I ordered a pitman arm for a 1968 from NPD and that solved all problems.
I dont know about El'Camino parts but they will probably fit. Andr� > At 12:29 PM 09/03/2002 -0400, you wrote: > >I am looking to switch my 67 malibu from manual to power steering. W hat > >parts should I make sure I get from the donor car??... of course besi des the > >obvious... > > > >power steering pump/brackets > >power steering box > > > >Will parts from a 67 El Camino work? > > > >Thanks > > > >Donnie > > Went through that on my 66 the big hang up is the PS pitman > arm Is different the small end that hooks to your drop link > has a smaller taper than the one that is on your car now. > So you need the drop link fitting off the doner car. > > I was stuck at that point & since I own a machine shop I > fixture'ed the pitman arm in my lathe & bored the taper > out to the bigger size. > > [EMAIL PROTECTED] & The Doberman gang in Dallas (Taxes) > Dave's Doberman page http://www.geocities.com/Athens/1877/ > Doberworld home page http://www.geocities.com/Athens/1878/ > El-Camino/Chevelle page http://www.geocities.com/Athens/1876/ > My Machine Shop http://cncshop.8m.com > > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] > ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
