Krister,

To expand on what Jason said, because the wiper arm is "spring loaded" you
need to keep even pressure on the splined "hub" as you pry it up.  By that I
mean as you pry up with a flat tip screwdriver on the opposite side of the
wiper arm you should also be pulling up on the wiper arm with your other
hand.  By doing this you will apply even pressure (more or less) and the hub
should slide up off the splines.  Once you get it moving you'll see what I'm
talking about.

cYa-

Herb Lumpp
1966 El Camino
ACES 3509, MCC 528
http://users.adelphia.net/~hlump/

----- Original Message -----
From: "jason pollock" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, January 15, 2003 10:26 AM
Subject: Re: [Chevelle-List] '66 wiper arm removal procedure


> krister,
>
> i used a flat head screwdriver and gently pried them up .i also put some
> tape on the cowl so as not to scratch the paint.
> having said that i believe there is a puller available specific to this
> task
>
>
> jason pollock
> On Wednesday, January 15, 2003, at 10:03 AM, Krister Meister wrote:
>
> >
> > Looking for step by step procedure on removing factory original wiper
> > arms
> > off the wiper arm hubs / spine what ever you would call them.  Pulling
> > the
> > arms away from the glass, I see and have popped out  of the way the thin
> > metal cover on the under side of the wiper arm - still can't figure out
> > how
> > the arm comes off.
> >
> > Thank you in advance for any assistance,
> >
> > Krister Meister
> > Bartlett, IL
> > '66 SS #'s matching
> >
> >
> > -----------------------------------------------------
> > To Unsubscribe please visit www.chevelles.net/list.html
> > To start a new topic, send mail to: [EMAIL PROTECTED]
> >
>
> -----------------------------------------------------
> To Unsubscribe please visit www.chevelles.net/list.html
> To start a new topic, send mail to: [EMAIL PROTECTED]


-----------------------------------------------------
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]

Reply via email to