Here's what Jegs has on them (where I bought mine):
 
 
The SpeedPro site list the dome height as .335 (http://www.federalmogul.com/speedpro/index.html). Sorry I can't get a direct link to the specs, you'll have to put in some vechicle info to get to them.
 

Ron

My '66 http://home.attbi.com/~cutter169/chevelle_page.htm
Team Chevelle #1668
ACES #5205

 

 
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Craig Ellis
Sent: Monday, January 27, 2003 4:20 PM
To: [EMAIL PROTECTED]
Subject: RE: [Chevelle-List] piston markings

Ron,
 
I got some more info and it appears I have the same piston. When I use the compression calculator, however, it gives me a ratio of 8.8 to 1. Here's the URL - maybe you can figure out what's up. http://www.angelfire.com/fl/procrastination/motor.html
 
I sure would hate to think my compression is THAT low!!!
 
Craig
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Cutter169
Sent: Sunday, January 26, 2003 10:51 PM
To: [EMAIL PROTECTED]
Subject: RE: [Chevelle-List] piston markings

My pistons that I just got are #844-L2328F60, Speed-Pro 402+.060 over (413), 10.8:1 (with 106 cc heads), .335 dome height. Specs (per Jegs) claim they are the same as L78/L89 375 hp.
 
Hope this helps.
 

Ron

My '66 http://home.attbi.com/~cutter169/chevelle_page.htm
Team Chevelle #1668
ACES #5205

 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Craig Ellis
Sent: Sunday, January 26, 2003 7:05 PM
To: Chevelle
Subject: [Chevelle-List] piston markings

Does anyone know what "L 2328  .060" means when stamped on the top of a piston???
 
Thanks

Reply via email to