Pelle, I strip with a wire brush on a straight die grinder. You have to wear mask and eye protection. I've had to pull a few wire bristles out of my skin. Then I use Eastwood Oxysolv to remove rust from the pits. I then use paint prep - degreaser/silicon remover. Finally I paint with epoxy primer like PPG DPLF-90. Its a lot of work. I've seen guys also thin out POR-15 and shoot it without going through the rust remover and paint prep process.
Larry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Pelle Andersson Sent: Wednesday, June 16, 2004 12:24 AM To: Chevelle Mailing List Subject: [Chevelle-list] Surface rust! I'm going to tear out the mats & sticky sound proofing from cars floor today & wonder how to get rid of the rust the best/qickest way & what to put there instead of the moist binding "tar paper"? Best Regards Pelle ************************************************* Chevelle Gearheads http://hem.bredband.net/gearheads/
