Thank's And a new set of rubber seals :-/ Best Regards Pelle ************************************************* Chevelle Gearheads http://hem.bredband.net/gearheads/
----- Original Message ----- From: "Larry Butler" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" <[EMAIL PROTECTED]> Sent: Monday, June 21, 2004 6:38 AM Subject: RE: [Chevelle-list] Surface rust! > Pelle, > > I strip with a wire brush on a straight die grinder. You have to wear mask > and eye protection. I've had to pull a few wire bristles out of my skin. > Then I use Eastwood Oxysolv to remove rust from the pits. I then use paint > prep - degreaser/silicon remover. Finally I paint with epoxy primer like PPG > DPLF-90. Its a lot of work. I've seen guys also thin out POR-15 and shoot it > without going through the rust remover and paint prep process. > > Larry > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Pelle Andersson > Sent: Wednesday, June 16, 2004 12:24 AM > To: Chevelle Mailing List > Subject: [Chevelle-list] Surface rust! > > > I'm going to tear out the mats & sticky sound > proofing from cars floor today & wonder how to > get rid of the rust the best/qickest way & what > to put there instead of the moist binding "tar paper"? > > Best Regards > Pelle > ************************************************* > Chevelle Gearheads > http://hem.bredband.net/gearheads/ > > >
