Some 19x8 and 19x10's would be very cool,Andre,,but more expensive. If I ever change wheels again on my 69 Elky,I think a set of 19x9.5's and 19x13's would be the way I go. 315's will fit a 68-72 if the right wheel is used. Clint Hooper H&H Custom,owner LT5 Registry Director http://www.LT5Registry.net/ ACES #1650 http://dalesplace.com/misc/friends/clint/clint_hooper.htm ----- Original Message ----- From: "Tigergutt" <[EMAIL PROTECTED]>
If it fits in an 18", I'll be happy, I think 20" look a little bit strange on a Chevelle. Do you know what max size is in the rear without tubbing ?? 315 335 ?? Full Revs!!! :o) Andr� -----Original Message----- From: [EMAIL PROTECTED] You will need at least an 18" wheel to run that large a brake rotor. Clint Hooper H&H Custom,owner LT5 Registry Director http://www.LT5Registry.net/ ACES #1650 http://dalesplace.com/misc/friends/clint/clint_hooper.htm ----- Original Message ----- From: <[EMAIL PROTECTED]> I dont know yet, I'll go with some five spokes for sure. I wouldnt like to go bigger than 18" if i can, maybe 9,5 up front with 275s and 10 or 11 in the rear with as big as possible tires. Ciao Andr� > Andre,what 18" or 19" wheels are you planning to run with those big rotors? > Clint Hooper > H&H Custom,owner > LT5 Registry Director > http://www.LT5Registry.net/ > ACES #1650 > http://dalesplace.com/misc/friends/clint/clint_hooper.htm > ----- Original Message ----- > From: "Tigergutt" <[EMAIL PROTECTED]> > > > Thanks > > Price isn't that bad > > I'll have to pay euro 510 for the calipers shipping included (they have > 1000km on them) that's around $ 620. > For the rotors I paid euro 330 shipping included and that's around $ 400 > The brackets to adapt the caliper to the spindles will cost like a case > of beer or wine for my buddy to keep him concentrated on the lathe, some > nice aluminum and some very nice bolts, maybe another $50-100 in total > > We are at a elevenhundred bucks now and I think it will be very good. > The only problem could be that the Rs-4 rotors aren't deep enough (to > come flush enough to the spindle) and that I might need some other > rotors or some dished wheels. > > Full Revs!!! > :o) > Andr� > > >
