Sounds good buddy. Ed
> From: Graham Wooden <[EMAIL PROTECTED]> > Reply-To: The Chevelle Mailing List <[EMAIL PROTECTED]> > Date: Tue, 24 Aug 2004 14:47:19 -0400 > To: The Chevelle Mailing List <[EMAIL PROTECTED]> > Subject: Re: [Chevelle-list] Flaming River steering columns > > Probably so, as the mounting bracket is for the OEM dash. About $440 from > Summit for the column and bracket. > Yuppers, comes with the directional and hazard switches, and the levers for > them and the tilt. According to the sales guy I spoke to, the horn is there > along with all the wiring. Since I have a new/update wiring harness, I don't > need their flasher kit and plugs in with the 4" connector. > I update my website when it done with the steps taken. > > -Graham > > Quoting Ed Riggins <[EMAIL PROTECTED]>: > >> I think the mounting bracket is the same for the non-tilt. Does it come >> complete with directional switch and levers for the switch and tilt? Stuff >> to make the horn work? I guess it's for a floor shift? Ed >> >> >>> From: Graham Wooden <[EMAIL PROTECTED]> >>> Reply-To: The Chevelle Mailing List <[EMAIL PROTECTED]> >>> Date: Tue, 24 Aug 2004 13:34:34 -0400 >>> To: The Chevelle Mailing List <[EMAIL PROTECTED]> >>> Subject: Re: [Chevelle-list] Flaming River steering columns >>> >>> Hey Ed, >>> >>> Um, maybe they went to a new product offering ... check out "FR20006-48" >> at >>> http://www.flamingriver.com/OEM-tilt.htm . >>> >>> I was able to get a better idea on the installation process from a sales >>> engineer over there. Should be pretty straight forward. Hopefully :^) >>> >>> -Graham >>> >>> >>> Quoting Ed Riggins <[EMAIL PROTECTED]>: >>> >>>> I thought the tilt for '67 was a one year only fit. First year >> collapsible >>>> with the flasher unit built in and a wider base to fit the dash. The >> later >>>> units had the key in the column and different dimensions didn't they? >> Ed >>>> >>>> >>>>> From: Graham Wooden <[EMAIL PROTECTED]> >>>>> Reply-To: The Chevelle Mailing List <[EMAIL PROTECTED]> >>>>> Date: Tue, 24 Aug 2004 09:43:57 -0400 >>>>> To: The Chevelle Mailing List <[EMAIL PROTECTED]> >>>>> Subject: [Chevelle-list] Flaming River steering columns >>>>> >>>>> Hi, >>>>> >>>>> Does anyone have experience of installing and using their steering >>>> columns >>>>> before? >>>>> I picked up the basic tilt one from them, #FLA-FR20006-48, for my 67SS >> - >>>> but >>>>> is there any "gotcha" parts that I should consider (or need) while >>>> changing >>>>> this out? I believe it's pretty much drop in as this one is made for >> 67-72 >>>> A >>>>> bodys ... >>>>> >>>>> Thanks in advance, >>>>> >>>>> -Graham >>>>> >>>>> 67 Chevelle SS >>>>> http://wwww.projectchevelle.com/ >>>>> >>>>> >>>>> >>> >>> >>> >> >> >> >> > > > -- > Graham Wooden, RHCE > [EMAIL PROTECTED] > >
