Hi Dale, Yes, the reproduction gauge set is now electric across the board. I saw a post from you on the Chevelle board that listed this out; went last night to AutoZone and got the pieces - works just fine!
Thanks! -Graham Quoting Dale <[EMAIL PROTECTED]>: > There is a small plug just above the timing cover on the drivers side but I > don't think there's room enough for a sending unit - might be though but > it'd look out of place. You could use a short 1/8" NPT nipple, a 90� > elbow, > another nipple and elbow to move the fitting out and away from the > distributor - but isn't the oil gauge a mechanical unit for a 67 dash with > gauges requiring a nylon hose or copper line? Maybe reproduction units > are > different? > > > Dale McIntosh > TC Gold #92/ACES #1709/NECOA #41 > <http://www.dalesplace.com/> DalesPlace My 67 El Camino > <http://www.chevellestuff.com/> ChevelleStuff Decoding info on 64-72 > Chevelles > <http://www.midwestchevelles.com/> MidwestChevelles Midwest Chevelle Show > Information > > > > > > _____ > > I've stopped 18,907 spam messages. You can too! > One month FREE spam protection at www.cloudmark.com > <http://www.cloudmark.com/spamnet?v1&rc=wn44hl> > <http://www.cloudmark.com/spamnet?v1&rc=wn44hl> Cloudmark SpamNet - Join > the fight against spam! > > > > > _____ > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Wednesday, September 08, 2004 3:30 AM > To: [EMAIL PROTECTED] > Subject: Re: [Chevelle-list] Oil pressure sending unit - issues with HEI > > > Isn't there a plug for oil @ the front of block? I know I have one on my > 86-350 and I put a sending unit there. > Larry (Z) > > -- Graham Wooden, RHCE [EMAIL PROTECTED]
