At 08:47 PM 2/3/2005, you wrote:
For what it worth, you need to check the shape of the inner wheel for the
inside bead to the mounting flange.
If it is flat, then the wheel should work.
If the wheel steps down towards the center axis then you are going to have a
problem with the caliper not clearing.
Back spacing is not the large problem in clearing the caliper. The step
down will always contact the caliper no mater how much back spacing there
is.
14" wheels are the big problem with caliper contact in the inner wheel area.
15" and larger wheels will clear the caliper.
Leo
This will be a crummy drawing, but it this what you mean?
_ _ _
\ \
l l
\ Bad l Good
l l
l l
Thanks,
BL
