Re: [Chevelle-list] Unilite Curve Calibration

[Larry Williams]

I arrived at the setting at the recommendation of Comp Cams tech to go with my new hyd CB 290H-R10 roller for my BB.   Actually they recommended 36-38 Deg total and 8 to 10 initial - sorry.   Thanks   Larry ----- Original Message ----- From: Dan To: Larry Williams ; The Chevelle Mailing List Sent: Saturday, March 26, 2005 7:50 AM Subject: Re: [Chevelle-list] Unilite Curve Calibration Larry, this may seem like a dumb question but, How did you figure out how much timiing to set your dist. at? I have never know exactly where to start. By the way I have a old unilite (mallory) and I have the plastic key somewhere if that is what your talking about for measurements. I'll look to see if I can find it. thanks. Dan Larry Williams <[EMAIL PROTECTED]> wrote: I have an early 90s Unilite distributor, and am looking someone who has the timing curve calibration tools.  If you do, can you measure the thickness of the tools and post them on the list.  I purchased a kit #29014 but it is for the later model.  I think the proper kit is #29015.  It seems that when I got the distribtor the kit was in the box.   My target total advance is 36 Deg w/ 10-12 initial.   If anyone needs the #29014, I would be happy to make a great deal.   Larry Dan