|
hey john 69 heater core is not to bad, just like rick said, after you take
off tire, with the ac in your way you will have to remove the skirt,
remove the glove box door and box their a nut way up there on the right,
so you will have to remove the, kick panel,, when remove the heater box on the
inside, you might think about removing the ac controls, i know it sounds
like you have to rip the hole dash out, but the cables connection are hard to
get to and you can break something,, I yank it all out in one unit, its
easier for me, you are going to want to replace heater door strips,, and
anything else that worn out , they sell a kit to go though them,
there is a clip that hold the core in, sometimes these are rusted away or
missing, make sure you have that, and double check everything before you start
your install,, cable, movements etc , when you go to install the skirt, start
with the top two screws then the back two, then work in a cris cross pattern,
starting all the screws, before, you tighten,,, p/s when you take out the last
nut on the heater box, pull the box straight out to clear the studs, then down
and out, good luck , cloner
|
