No way to control the expansion. Use the flat stuff and roll it on good and tight. --- Dan Mascheck <[EMAIL PROTECTED]> wrote: > What about using some of the injection foam they > have in pressurized > cans....Will it work?? Or is it a mistake!! > > -----Original Message----- > From: Scott Somers [mailto:[EMAIL PROTECTED] > Sent: Thursday, April 21, 2005 12:54 PM > To: [EMAIL PROTECTED]; The Chevelle Mailing List > Subject: Re: [Chevelle-list] interior questions > > Definately dynamat. I used several, several hundred > dollars of it a few > years ago in a comp audio car that I built when I > was playing with that > hobby. Use enough on the floor, ceiling, doors, > rear deck, truck, over > wheel wells, anywhere and the car will be a tomb > with minimal rattles. I > used it 3 and 4 layers thick in some high resonance > areas. But it do get > expensive. I also put house insulation ( the pink > stuff ) in areas that I > could not get to any other way but shoving in a > hole. Under the rear seat > was one spot > > ----- Original Message ----- > From: "Pat" <[EMAIL PROTECTED]> > To: "'The Chevelle Mailing List'" > <[email protected]> > Sent: Thursday, April 21, 2005 10:37 AM > Subject: RE: [Chevelle-list] interior questions > > > > Check out this stuff.........it works great > > > > http://www.dynamat.com/ > > > > Pat > > > > 68 Convt. > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On > Behalf Of EXT-Jasper, > > Garry > > W > > Sent: Thursday, April 21, 2005 11:29 AM > > To: Chevelle Mailing List (E-mail) > > Subject: [Chevelle-list] interior questions > > > > All > > > > I have the interior of my 71 gutted including dash > removal, time to start > > putting it back together. Looking for info on what > I can use to replace > > the > > original soundproofing (tar paper and padding) saw > some nice shiny > > (aluminum) backed stuff being used on one of the > Car shows the other > > night. > > Looking to limit that road noise sound. Does any > one have a recommendation > > or should I just go with the new stuff listed in > many of the after market > > catalogues. I have some stiff poly foam (packing > type material) that I was > > planning on using under the dash, got some 3m Glue > the other day any word > > on > > that idea good or bad. It looks like it would be > better then the stuff > > that > > was crumbling apart when I removed the dash that > looked like some kind of > > fiber board gone bad. > > > > > > Garry > > > > > > > > > > > > > > > > >
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
