Mike,

So do you turn the drill forward or reverse to check the speedo? I presume forward...

thomas

From: mike f <[EMAIL PROTECTED]>
Reply-To: The Chevelle Mailing List <[email protected]>
To: The Chevelle Mailing List <[email protected]>
Subject: Re: [Chevelle-list] Help: Trans/Speedo Help Needed.
Date: Mon, 6 Jun 2005 16:24:18 -0700 (PDT)

Put the transmission end into a drill and spin it up.
mike
--- [EMAIL PROTECTED] wrote:

>  Thank you,
>
> Yes I am going to check if the inner cable moves
> when the transmission is moving and going to use a
> drill to see if the speedo meter works.
>
> Kelly
>
> -----Original Message-----
> From: Krister Meister <[EMAIL PROTECTED]>
> To: The Chevelle Mailing List
> <[email protected]>
> Cc: [email protected];
> [EMAIL PROTECTED]
> Sent: Mon, 6 Jun 2005 13:49:38 -0500
> Subject: Re: [Chevelle-list] Help: Trans/Speedo Help
> Needed.
>
>
>
>
>
>
> Easy way to check cable condition is with the old or
> new cable hooked to
> the trans, routed into the car correctly, unhooked
> to the speedo (have it
> hanging down so you can see or feel the end) - take
> it for a slow ride
> around the neighborhood and see if the inner cable
> rotates
>
> Krister
>
>
>
>
>
>
>                       [EMAIL PROTECTED]
>
>
>
>                       Sent by:
>  To:
> [email protected]
>
>                       [EMAIL PROTECTED]
>  cc:
>
>
>                       evelles.net
>  Fax to:
>
>
>
>  Subject:  Re:
> [Chevelle-list] Help: Trans/Speedo Help Needed.
>
>
>
>
>
>                       06/06/2005 10:31 AM
>
>
>
>                       Please respond to The
>
>
>
>                       Chevelle Mailing List
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> I have a 64 El Camino with a Muncie 4 speed, M 21.
> Just had it  rebuilt
> at Cottsman.   Was recommended to me.   After
> getting the car back from
> rebuilt transmission, my speedo does not work.
>
> I replaced the cable, and still nothing.   I see the
> old cable  worked ok,
> once I removed it.
>
> With my cable it is a screw on cap at both ends, so
> not hard to  replace.
> Just can not figure why the speedo does not work
> after  having the
> transmission rebuilt.  yes it did work before the
> transmission  work.
> Will be talking to them today.
>
> So I too need help with the Transmission and Speedo
> cable too.
>
> Thank you  All,
>
> Kelly
>




__________________________________
Discover Yahoo!
Stay in touch with email, IM, photo sharing and more. Check it out!
http://discover.yahoo.com/stayintouch.html




Reply via email to