Ryan, I assume your talking about the upper rear control arms because there is no lip that sticks out on the lowers ( the lips stick in on both sides). If this is the case, the flange on the bushing sits flush on the flat side of the control arm once installed. You should drive the bushing in so it enters the flat side first and then seats on the side with the lip as the flange of the bushing seats against the flat part of the arm.
Hope this helps, Trooper ----- Original Message ----- From: "Ryan Langstraat" <[EMAIL PROTECTED]> To: "Chevelle Chat Forum" <[email protected]> Sent: Wednesday, June 29, 2005 8:15 PM Subject: [Chevelle-list] Rear Control arms I apologize if I missed a reply on this email: I was wondering what side of the control arms the flange on the new bushing goes against. Does it rest on the lip that sticks out or does it rest on the flat side?? I took pic's when I tore it apart but didnt get in close enough to be able to tell for sure. Live and learn. Thank you for your help guys... Ryan
