Title: Message
|
James,
On
mine, if you look at the gasket on the plate, there is a removeable
circle. I took that out and then just drilled a hole that size, 2.5 inches
I think.
Jim
Buckingham
----- Original Message -----
Sent: Tuesday, July 26, 2005 10:32 AM
Subject: TRANS CONVERSION
Hey Guys, I need a little advice...
actually I need allot but I will take a little at a time :o). I am
converting from auto on the column to 4 spd on the floor with
console. I would like to know if I should cut the trans tunnel just big
enough for the shifter and gate to function or cut the inside perimeter of the
shift tunnel pan ? Pros/cons ? also the steering column seal plate that
attaches to the fire wall ,I need to make the hole that the linkage rod from
the peddle to the z-bar needs to go through .what size/shape should it be? its
easier to cut twice than to try and weld the mistakes back in. any and all
input is appreciated. Thanks in advance,
Jimmy.C
|
- RE: [Chevelle-list] Fw: TRANS CONVERSION Jim Buckingham
-
