Hi,
Factory clear can be wet sanded with 400 - 600 grit and recleared. But be
sure to use an adhesion promotor prior to spraying the clear. It is a
solvent you spay on with your gun, it will help soften the factory baked
clear and let the new clear grab hold.
Gene
----- Original Message -----
From: "Shawn Price" <[EMAIL PROTECTED]>
To: "The Chevelle Mailing List" <[email protected]>
Sent: Wednesday, August 31, 2005 3:46 PM
Subject: [Chevelle-list] More paint (off topic)
Speaking of paint, I have a '94 Z71 (Not a daily driver, $65 to fill up
last time). Anyway, I believe that it came with a base-coat, clear-coat
system from the factory. Over the years I've noticed that things like
leaves have etched their outlines into the clear and I can't remove it
with anything I've tried. (The last attempt was the clay bar from
Mother's). Could I possible wet-sand this out with like 3000 paper or
similar? I know this will remove part of the clear and possibly get into
the base-coat, but I don't know what the alternative is other than a total
repaint, which it doesn't need. Can something like this be re-cleared?
Thanks for all the information
--
Shawn Price
Network Team Lead
Technology Solutions
Morrison Homes
404-427-8229
