That's using your head. Now I wonder if Autozone sells the frame mounts, too? I think I'll go look...
C ----- Original Message ----- From: <[EMAIL PROTECTED]> To: "jim" <[EMAIL PROTECTED]>; "The Chevelle Mailing List" <[email protected]> Sent: Monday, October 03, 2005 8:25 PM Subject: Re: [Chevelle-list] Re: Parts > Engine mounts yes. Frame mounts, I don't know. I would suspect yes. > > I went to autozone.com and put in a '72 chevelle big block, then a small > block. Both of the engine mounts are the same. > > Charles > www.65ss.com > > > > ----- Original Message ----- > From: "jim" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]>; "The Chevelle Mailing List" > <[email protected]> > Sent: Monday, October 03, 2005 6:39 AM > Subject: Re: [Chevelle-list] Re: Parts > > > > can you tell me if that applies to the 1972 cars as well ? thanks , > > Jimmy.C > > ----- Original Message ----- > > From: <[EMAIL PROTECTED]> > > To: "The Chevelle Mailing List" <[email protected]> > > Sent: Sunday, October 02, 2005 8:43 PM > > Subject: Re: [Chevelle-list] Re: Parts > > > > > >>I didn't track all the emails in this chain, but the motor mounts for a BB > >>vs. SB in a '65 are identical in every shape and form. The frame mounts > >>are the exact same height also, but the BB version have a small relief for > >>clearance I suppose, but are completely unnecessary on my 502. I don't > >>know if any other BB's needed this clearance, but I doubt it. So I say > >>stick with the SB stuff. Its all the same. > >> > >> Charles > >> www.65ss.com > >> > >> > >> > >> ----- Original Message ----- > >> From: "Clint Hooper" <[EMAIL PROTECTED]> > >> To: "The Chevelle Mailing List" <[email protected]> > >> Sent: Sunday, October 02, 2005 5:41 PM > >> Subject: Re: [Chevelle-list] Re: Parts > >> > >> > >>> If you run headers,they will hang a little bit lower. > >>> Clint Hooper > >>> H&H Custom,owner > >>> 1969 El Camino ProTourer > >>> 2001 H-D FLHR custom bagger > >>> http://dalesplace.com/misc/friends/clint/clint_hooper.htm > >>> ----- Original Message ----- > >>> From: "Ryan Langstraat" <[EMAIL PROTECTED]> > >>> > >>> > >>>> Clint > >>>> would setting the engine lower vs. higher make any foreseeable > >>>> clearance > >>>> problems? > >>> > >>> > >>> > >>> > >> > >> > >> > > > > > > > > >
