Pelle,
You might want to get some Metal Ready from the same company. It will prep
your floor for the POR15. See below for product info.
Larry
Our simple one-step process gently etches metal, creating an ideal anchor
pattern for coatings such as POR-15®, while simultaneously leaving a zinc
phosphate film to promote chemical bonding of paint and steel. Avoid other
preps that may leave harmful residues that prevent proper adhesion of
POR-15® or other coatings.
After thoroughly degreasing your work piece, apply environmentally safe,
METAL READYT to both neutralize any rust and etch any clean bare metal. This
will allow better adhesion of POR-15® or any paint. METAL READYT is not
caustic, corrosive, toxic or flammable.
----- Original Message -----
From: "Pelle Andersson" <[EMAIL PROTECTED]>
To: "The Chevelle Mailing List" <[email protected]>
Sent: Tuesday, November 01, 2005 6:20 PM
Subject: [Chevelle-list] Good enough for POR15?
http://www.rapidshare.se/?527051 (Some adult related ads occur, but no
pop-ups)
Or do I have to sand down the last remains of paint & rust?
I've bought Marine Clean, Metal ready & POR15.
Man! That stuff is quite expensive here in Sweden!
Approx $100 total for a quart of each :-/
Pelle
