I’ll be calling them Monday!! Thanks!!
Dan
From: Fred Dowaliby
[mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 23, 2005
8:58 PM
To: The
Chevelle Mailing List
Subject: Re: [Chevelle-list]
Chassis and steering options
Dan,
I'm also using an AGR box and so far so good, except it does squeal when I
reach the limit of its span. I got mine from Summit.
Fred
On Nov 23, 2005, at 6:26 PM, Herb Lumpp wrote:
Dan,
I have an
AGR box on my El and so far it's been flawless. Here's AGR's web page
http://www.agrperformance.com/ and another good thing, Summit
sells AGR so when you find the part number for your application, go to Summit and get a lower
price.
Herb Lumpp
http://users.adelphia.net/~hlump/index.htm
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Clint Hooper
Sent:
Wednesday, November 23, 2005 3:36 PM
To:
[email protected]
Subject:
[Chevelle-list] Chassis and steering options
According to a post I just read on
Pro-Touring.com,the ATS spindles were quoted at $625/pair for a 1st Gen
F-body. I emailed the builders to give me a price quote on a A-body
spindles.(basically the same thing) What's keeping me from buying a pair now is
the fact I would have to sell my Baer C4 Vette brakes and buy C5 or C6 stuff.
I'll probably wait till the new Z06 brake parts become more readily available
and then do it all at one time.
My recommendation
for a good steering box would be AGR out of the Dallas area. Maybe someone can post their
contact information as I can't seem to find their business card,right now. If
anyone else is running another good box,maybe they can post the info. Herb?
Keith?
Clint Hooper
H&H Custom,owner
1969 El Camino ProTourer
2001 H-D FLHR custom bagger
http://dalesplace.com/misc/friends/clint/clint_hooper.htm
----- Original Message -----
From:
Dan Mascheck
I ordered the GW setup. I know there is better, but they gave me a $600
discount..I have checked into the ATX spindles, but they are not ready for
sale, and..I would have to upgrade my mags. Too much for one time! I’m not
quite as rich as you are Clint..GRIN. The ATX spindles will run close to $800 a
piece, plus I would still need to upgrade the A arms! Oh well…I can cry later.
I also found out I need to upgrade to a 12:1 steering box. Any suggestions
on who to get it from or get my old one reworked. Plus some mods on my rear
axle for the upgraded Wilwood rear brakes.
You were correct, about their being some sharp folks on Lateral G. Thanks
for the recommendation.
Dan
