Re: [Chevelle-list] Flowmaster

[Bill Bradley IV]

i also have 40's on mine, and they are a little loud for me. Bill Bradley 67 Malibu Edmond Oklahoma ----- Original Message ----- From: Ron To: 'The Chevelle Mailing List' Sent: Saturday, January 28, 2006 8:58 PM Subject: Re: [Chevelle-list] Flowmaster I have 40’s on mine..like I said in a previous post, I think it’s a little loud, but never had any pops but then there is a little more involved in popping then exhaust pressure.   I plan on changing out the mufflers this next summer to quite it down some.   Ron My '66 http://myweb.cableone.net/cutter169/       From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Treanor Sent: Saturday, January 28, 2006 6:56 AM To: [EMAIL PROTECTED]; The Chevelle Mailing List Subject: Re: [Chevelle-list] Flowmaster   HI MATT; 70% of the guys in my chevelle club have the 40 series on thier cars. The 30 series is for a race application. I would go with thier recommendation. I run 70's, called the big block muffler, but I like it quiet inside. MIKE, 69 SS396.----- Original Message ----- From: [EMAIL PROTECTED] To: The Chevelle Mailing List Sent: Friday, January 27, 2006 7:13 PM Subject: Re: [Chevelle-list] Flowmaster   When I called Flowmaster, they said that the 40 series was NOT recommended for big blocks. The guy said they tend to pop. -----Original Message----- From: Matthew Post <[EMAIL PROTECTED]>Sent: Jan 27, 2006 11:42 AM To: The Chevelle Mailing List , The Chevelle Mailing List Subject: Re: [Chevelle-list] Flowmaster Anyone here running Super 40s?  I was going to do the regular old 40 series two chamber ones (=LOUD).  But the Flowmaster website says the Super 40s are just as loud outside, but with less interior resonance (that Flowmaster drone @ about 2000-2500 rpm).  Just curious if anyone had them. Thanks, Matt At 06:32 AM 1/27/2006, Chevelle List wrote: I have been checking them out and they say that they have quit including the 30 series mufflers in the kit.They now are including the super 40 series with delta flow technology(whatever that is!!!) John