Re: [Chevelle-list] ground straps and shims

[Rick Schaefer]

  Agree with john on the back of the head to firewall, also from engine  near the engine  mount to the crossmember that engine mount sits on, and third is from body to frame and i think john is right again- lower part of firewall near bottom of fender to the frame.

On 2/2/06, John Nasta <[EMAIL PROTECTED]> wrote:

One goes from the back of the head to the firewall on the passenger side. They are also on each side of the engine and IIRC they attach to the A-Arms or something like that. I think there is also one down at the base of the passenger side fender somewhere. Been a while since I looked at those.

 

 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto: [EMAIL PROTECTED]]On Behalf Of Jimmy C.
Sent: Thursday, February 02, 2006 5:12 PM
To: Chevelle Forum
Subject: [Chevelle-list] ground straps and shims

 

I've heard it was a good thing to make sure the motor, firewall & frame were all grounded together ? or maybe it was the motor to the firewall to the fram? I bought a braided copper ground strap kit spicifficley for chevelles. can anyone tell me the proper places, where the straps should be. when I took out the small block, the only ground wires I seen were from the harness to the firewall. thanks for any help ! Jimmy.C

--
Rick Schaefer
72 TPI El Camino