|
Thank you guys! While I’m “at it” I’m
planning to mount a “remote” oil filter due to it’s present position
behind the headers! B.R. Pelle Från:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] För
Bill Lessenberry Jack up the car & put it on stands. Remove both motor mount
bolts, raise the motor by jacking it up on the balancer with a piece of wood
between the jack & the balancer. Wedge blocks between the mounts on
the motor & the ones on the frame to hold the motor up. That usually
gives you enough clearance to get the pan out. Sometimes you will have to
turn the crankshaft to clear some of the counterweights on the crank, so you
might want to pull the spark plugs out before you jack everything up.
Hope that helps. Pelle Andersson
<[EMAIL PROTECTED]> wrote: Hi Guys! This weeks rookie Q Do I have to Pull my
402BB to change the oil pan? How much oil does the
engine require? Best regards Pelle ______________________________ |
