Drive shaft loop check Jeg's or Summit -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dan Mascheck Sent: Thursday, April 27, 2006 8:47 PM To: 'John'; 'The Chevelle Mailing List' Subject: Re: [Chevelle-list] Drive shaft yoke!
Maybe I used the wrong term for what I'm looking for! I want something to contain the drive shaft in case a U-joint snaps especially on the front of the drive shaft! I don't want the shaft spinning inside my car! I'm running over 700HP, so the threat of breaking a joint is highly possible! I may have used the wrong term! I thought they called it a yoke that encircles the drive shaft! Dan Mascheck -----Original Message----- From: John [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 26, 2006 6:27 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Drive shaft yoke! Larry the big difference in yokes is the number of splines. Muncie 4spd 70 and up take 32 spline yoke instead of standard 27 spline output. Same yoke as some Turbo 400's. All 26 spline input Muncies take 32 spline output and all 10 spline input trans take 27 output. Length may vary according to driveshaft etc. Some 400 Turbo's had bolt on yoke for driveshaft. It bolted to end of mainshaft. Hope some of this helps. By the way what is the length of the drive shaft you have from center of u-joint to center of u-joint? If right length I need to talk to you about taking it off your hands. Thanks John ----- Original Message ----- From: "Larry Shouse" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" <[email protected]> Sent: Tuesday, April 25, 2006 6:37 PM Subject: Re: [Chevelle-list] Drive shaft yoke! >I have a driveshaft laying around with a yoke still on it. Not sure what >year it came off of, or what tranny was used with it, but it came with my >66 basket case. It's too short for my car with a big block and 4 speed. >Anybody have an idea > > are all yokes interchangeable with Chevelles? > > Dan, what's your engine/tranny combo? If we can determine that my yoke > will work, you can have it for shipping cost. > > Larry Shouse > > ----- Original Message ----- > From: "Dan Mascheck" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Tuesday, April 25, 2006 7:16 PM > Subject: [Chevelle-list] Drive shaft yoke! > > >> I'm trying to find a drive shaft yoke for my 72 Chevelle. Any ideas? >> >> Dan Mascheck >> >> >> > > > >
