Title: Re: [Chevelle-list] 66 Brake Drums
|
Chuck, I'll check around first locally. If I need
to get yours, I will contact you off list.
Thanks,
Larry Shouse
----- Original Message -----
Sent: Wednesday, May 03, 2006 8:37
AM
Subject: Re: [Chevelle-list] 66 Brake
Drums
I have several sets... yours for the price of shipping.
You may want to check out local resources, however, as the weight could
make the shipping cost prohibitive. If I recall correctly, the rear drums are
2" wide x 9.5" diameter with a 4.75" bolt circle, and almost any GM
intermediate up through the late 80's used the same spec. So finding
drums that interchange should be no problem, unless you're after the "correct"
ones for your application. In fact, I believe there are even some Buick
G-body applications that used aluminum drums (w/iron liner) that will yield a
slight unsprung weight savings, and you might be able to luck up on in a
salvage yard. If you want to check shipping on the drums, estimated
weight is 25lbs for the pair; I'm in zip code
37172.
Chuck
on 5/2/06 9:17 PM, Larry Shouse at
[EMAIL PROTECTED] wrote:
Thanks
Devin.
Anybody out there
have a set or rear drums they want to get rid of?
Thanks!
Larry
----- Original Message -----
From: Devin
<mailto:[EMAIL PROTECTED]>
To: The
Chevelle Mailing List <mailto:[email protected]>
Sent: Tuesday, May 02, 2006 9:55 PM
Subject:
Re: [Chevelle-list] 66 Brake Drums
If
my memory is correct you should have 2" wide drums on the rear and 2.5"
wide drums on the front. I think they will slide on however.
Been a while sine I had drums on the
front.
Devin
----- Original Message -----
From: Larry Shouse
<mailto:[EMAIL PROTECTED]>
To: Chevelle
List <mailto:[email protected]>
Sent:
Tuesday, May 02, 2006 6:01 PM
Subject: [Chevelle-list] 66
Brake Drums
Is the front drums the
same as the back drums on a 66? I need drums for the back brakes, and I
don't need the set up front.
Thanks.
Larry
Shouse
|
