|
Dave- I did the checking today I said I would
and was unable to come up with anything for you. The rw507g bearing does
not appear in either my bca or timken bearing books, and I ran into the same
listings your parts houses have, calling for the other bearings.
Devin
----- Original Message -----
Sent: Wednesday, May 24, 2006 9:32
AM
Subject: Re: [Chevelle-list] looking for
a yoke seal 8.2 Pontiac rear end
At 12:16 PM 5/18/2006, you wrote:
That's actually a better rear than the Chevy 10 bolt. It's a BOP 8.2
rear and parts are no problem. I get mine locally at the Carquest store.
Tell em you have a 66 GTO so you don't confuse
them.
Mike
Here in Dallas they have no
idea. I can't find the axle bearings
anywhere. Seems they are not available
anywhere. & I have spent
hrs on the phone. The ones that I can get are
to small RW-507-CR.
RW-507-CR are 2.749 OD X 1.380 ID.
I need
RW-507-G 2.890 OD X 1.437 ID & .740 thick, sealed ball
bearing .
I can even use used ones (can be re-packed).
Help! Maybe I should have
bought a Ranchro F**D , sorry I cussed.
Why my 66 Elky ended up with this
rear end I don't know...
|
- Re: [Chevelle-list] looking for a yoke seal 8.2 Pontiac rear ... Devin
-
