Re: [Chevelle-list] Spark plug wires

[Larry Shouse]

Rich,   Be sure to take pictures and share them when done. I love looking at other people's engines and cars for ideas.   Larry Shouse ----- Original Message ----- From: [EMAIL PROTECTED] To: The Chevelle Mailing List Sent: Friday, May 26, 2006 6:56 AM Subject: Re: [Chevelle-list] Spark plug wires Larry,   That is one good looking engine!! I really like the plug wire guides as well. I'll be replacing the valve covers when I get all of my parts, and ducks in a row, and will add those to the mix. Thanks for the picture; very motivating. Rich -----Original Message----- From: "Lynch, Charles Edward LT NETC, N7" <[EMAIL PROTECTED]> Sent: May 25, 2006 11:45 AM To: The Chevelle Mailing List Cc: [EMAIL PROTECTED] Subject: Re: [Chevelle-list] Spark plug wires   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Larry Shouse Sent: Thursday, May 25, 2006 9:04 To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Spark plug wires Ditto. I also bought the MSD p/n 35379 for the big blocks which are 8.5mm spiral wound 50 ohm wires with the bendable ends. They are red with gray boots.   As a sidenote about MSD as a company, when I assembled my engine, I took it in to have it dyno'ed. In the process, I lost my coil wire. Not being able to find a suitable replacement at Summit, I called MSD. They sent one out at no charge. Way to go MSD!   Here's a picture of my engine with the wires.   www.fuglybrothers.com/images/engine5-16-06.jpg   Larry Shouse     ----- Original Message ----- From: Devin To: [EMAIL PROTECTED] ; The Chevelle Mailing List Sent: Thursday, May 25, 2006 12:57 AM Subject: Re: [Chevelle-list] Spark plug wires I found that MSD Multi-angle ends worked best with my BB and Hooker headers.  They can each be bent to fit their particular location.   Devin ----- Original Message ----- From: [EMAIL PROTECTED] To: The Chevelle Mailing List Sent: Wednesday, May 24, 2006 8:33 PM Subject: [Chevelle-list] Spark plug wires I've been meaning to ask for a recomendation on wires as well. I have a 69 396SS with Hooker Comp headers and I'm needing to replace the plug wires. Any brands to avoid? 45 degree boots? 135 degree boots?   -----Original Message----- From: [EMAIL PROTECTED] Sent: May 23, 2006 9:05 PM To: Chevelle-list@chevelles.net Subject: Re: [Chevelle-list] (no subject) I bought some of the Taylor 8MM spiral wound wires. Just plain black, with the 45 degree boots. You can get them straight, or 90 degree also. They appear stock, only giveaway is some white writing on them.