Yeah, it wouldn't hurt to submit for a quote. What I really like
about Coil Spring Specialties is that every order is a custom
order. So you get to give them your exact specifications.
Good luck.
-Matt
At 01:50 PM 6/20/2006, Jim Sullivan wrote:
Matt, I had it backwards. I was thinking 1 inch spring height equals 2
inch at the car, equaling 4 inches.
One inch would not be too bad. They are heavier and the same diameter. I
was a little concerned they would be rough riding as they are heavier coils.
I was going to mic them and get the difference.
I did submit my info to get a quote from Coil Springs Inc., but now you've
got me thinking.........
Thanks
Jim
----- Original Message -----
From: "Matthew Post" <[EMAIL PROTECTED]>
To: "The Chevelle Mailing List" <[email protected]>; "The Chevelle
Mailing List" <[email protected]>
Sent: Tuesday, June 20, 2006 2:39 PM
Subject: Re: [Chevelle-list] '69 Suspension question
> They might not lower the car very much. A two inch height difference
> in the actual springs probably only equals a one inch difference in
> ride height. That's assuming the lower spring is a heavier (higher
> rate) spring. Since you don't know the source of the heavier
> springs, make sure their diameter or width is the same as the stock
> ones. Then, I would try them out.
>
> -Matt
>
