Re: [Chevelle-list] HEI ignition wires for SBC

[Devin]

Generic cut wires are cut plenty long enough to fit early Corvettes, which run along a mount on the bellhousing then up underneath the manifolds.  All the small blocks I've looked at have these holes in place, one on the bell flange and 2 on each side on the block near the head.   Devin ----- Original Message ----- From: Dennis McGillis To: The Chevelle Mailing List Sent: Saturday, June 24, 2006 7:53 PM Subject: Re: [Chevelle-list] HEI ignition wires for SBC My new crate 350 w/HEI and GMPP wires has the same length problem and the ends appear to be molded on.  I have been looking for the right guides to keep them in place and look sort of stock.  No luck yet, does anyone have a good idea? Thanks, Dennis McGillis - 1965 Malibu SS-350   ----- Original Message ----- From: John Nasta To: The Chevelle Mailing List Sent: Saturday, June 24, 2006 6:29 PM Subject: [Chevelle-list] HEI ignition wires for SBC What kind of wires are you guys using on SBCs w/ HEI? I just bought new KEM wires from a local auto parts store and the forward four are ridiculously long.