Ok!
Seemes I've them at the right place :-)
I thought they might be alignment washers for the fenders (the ones just beside
the hood hinges)
They are "cupped" should the cupped side be outwards or inwards?
Pelle
----- Original Message -----
From: Leo John Costigan
To: The Chevelle Mailing List
Sent: Friday, January 05, 2007 6:37 PM
Subject: Re: [Chevelle-list] Front end fastener kit?
Pelle,
On my 70 on the inner fender well on the lower rear there are two holes that
are larger than the rest. The large washers will be used here. They fasten
the fender to the body.
On my 65 on the inner fender well above the wheel there are two holes that
are larger than the rest. They fasten the inner fender to the fender and are
about 12" separation between them.
The kit says it is for a 70 up and I don't remember which model year you have.
I had to get two different kits when I did mine.
Hope this helps.
Leo
----- Original Message -----
From: Pelle Andersson
To: The Chevelle Mailing List
Sent: Friday, January 05, 2007 3:42 AM
Subject: [Chevelle-list] Front end fastener kit?
What are the 4 big washers in these kits for?
http://cgi.ebay.com/ebaymotors/Front-sheet-metal-kit-Camaro-1970-71-72-73-74-75-76-81_W0QQcmdZViewItemQQcategoryZ36475QQihZ016QQitemZ260018151178QQtcZphoto
Best regards
Pelle
______________________________
Chevelle gearheads
http://hem.bredband.net/chevellegearheads/
http://groups.msn.com/chevellegearheads/restorepics.msnw
----------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.433 / Virus Database: 268.16.6/617 - Release Date: 1/5/2007
11:11 AM
